2012

Experimental and Numerical Investigations of the Thermal Environment in Air-cooled Data Centers, Waleed Abdelmaksoud

Functional and Behavioral Product Information Representation and Consistency Validation for Collaboration in Product Lifecycle Activities, Mehmet Murat Baysal

Thermally Aware, Energy-Based Techniques for Improving Data Center Energy Efficiency, Dustin W. Demetriou

Champs-Multizone and Virtual Building for Integrated Building Systems Design and Performance Evaluation, Wei Feng

Modeling and Managing Engineering Changes in a Complex Product Development Process, Weilin Li

Towards Closed Loop Control of a High-Speed Jet for Noise Reduction, Kerwin Richard Low

Shape Memory Assisted Self Healing (Smash) Polymeric and Composite Systems, Erika D. Rodriguez

Enriching Step-Based Product Information Models to Support Product Life-Cycle Activities, Mehmet Ilteris Sarigecili

Experimental Investigation of an Actively Controlled Three-Dimensional Turret Wake, Patrick Ryan Shea

Building Envelope Wind Pressure Manipulation for Application in Streamlined High-Rise Buildings, Sivaramprasad Sivakumar

Effects of Surface Roughness on the Indoor Particle Deposition Rate Constant, Shaojie Wang

Study of VOCs Transport and Storage in Porous Media and Assemblies, Jing Xu

Development of a Novel Statistical Method and Procedure for Material Characterization and a Probabilistic Approach to Assessing the Hygrothermal Performance of Building Enclosure Assemblies, Jianhua Zhao

2011

Development of a Novel Methodology for the Identification of VOC Emission Sources in Indoor Environments based on the Material Emission Signatures and Air Samples measured by PTR-MS, Kwanghoon Han

Extending the Passive House Approach with Geoslar Exergy Storage Technology: A Vision for Reducing Purchased Energy Use in Existing and New Construction, Lowell Edwin Lingo

Physical adsorption, chemisorption and catalytic oxidization for indoor VOCs removal, Jingjing Peu

A Conceptual Framework and Simulation Modeling Of Engineering Change Management in a Collaborative Environment, Krishna Rao Reddi

A Detailed and Systematic Investigation of Personal Ventilation Systems, Jackie Russo

Control of Turbulent Flow Over an Articulating Turret for Reduction of Adverse Aero-Optic Effects, Ryan Wallace

Dynamic Botanical Filtration System for Indoor Air Purification, Zhiqiang Wang

Mode I Delamination Fracture Characterization of Polymeric Composites under Elevated Temperature, Wenming Zhao

2010

Mitigation of cross-contamination in an aircraft cabin through the use of localized exhaust, Ryan K. Dygert

Study of particle and ozone penetration through the building envelope, Zhi Gao

Interface problems in vascular mechanics and the mechanics of layered systems, Chien M. Nguyen

2009

Detailed examinations of the human micro-environment by CFD, Christopher N. Sideroff

2008

Analysis methods for machining fixtures with multiple point contacts, James Nathaniel Asante

An experimental investigation of low-dimensional techniques for large scale noise source characterization in a heated jet, Andre M. Hall

Fully three-dimensional and viscous semi-inverse method for axial/radial turbomachine blade design, Min Ji

Application of frequency-domain-method to rotorcraft aerodynamics, Manish Kumar

Modeling and numerical simulation of salt transport and phase transitions in unsaturated porous building materials, Andreas Nicolai

Analytical models for flow control in subsonic and supersonic diffusing flow paths using steady blowing and suction, Mehmet Nasir Sarimurat

Development of a three-dimensional multistage inverse design method for aerodynamic matching of axial compressor blading, Michael P. C. Van Rooij

2007

Application of low-dimensional techniques for closed-loop control of turbulent flows, Julie Ausseur

Experimental evaluation of indoor air cleaning technologies and modeling of UV-PCO (photocatalytic oxidation) air cleaners under multiple VOCs conditions, Wenhao Chen

A modeling and experimental investigation of coupled heat, air, moisture and pollutants transport in building envelope systems, Hui Li

Velocity measurements in the breathing zone of a moving thermal manikin within the indoor environment, David Marr

Development of experimental methods for characterizing water vapor transmission in building materials, Marcin Pazera

Low-dimensional techniques for active control of high-speed jet aeroacoustics, Jeremy Pinier

Development of an analytical model for pitch link loads of bearingless main rotors, Gregory T. Russell

2006

Simulation of the cross-flow fan and application to a propulsive airfoil concept, Joseph Kummer

2005

Low-dimensional techniques for sound source identification in high speed jets, Charles E. Tinney

Interface problems in micromechanics and effective composite property analysis, Mayue Xie

2004

Graph-based mechanical product family modeling and functional tolerancing for mass customization, Haoyu Wang

2003

On the existence and character of Gortler vortices in compressible flow, Laurie Dawn Ciolkosz

An investigation of the fluid-dynamics aspect of the fan and HRM (High Resistance Medium) interaction, Young Hoon Kim

A generic framework for design evolution: From function-to-form mapping to synthesis of tolerances, Nilmani Pramanik

2002

Through-flow model for fan/flow-resistance configurations, Ahmed Farouk Abdelwahab

Enhanced inverse design code and development of design strategies for transonic compressor blading, Adam Jon Medd

A comprehensive study of self-induced torque amplification in rotary viscous couplings, Sankar Krishnan Mohan

A three-dimensional crack tip element for energy release rate determination and delamination growth prediction, LiJie Yu

2001

Experimental and computational investigations of fan/high-resistance medium flow interactions, Yu Wang

2000

Unsteady wake structure behind a solid disk, Helene Balligand

Fixturing analysis and re-design in a co-operative fixture design system, Jianmin Liao

Design and analysis of supply chain networks using genetic algorithms and numerical clustering, Mukundan Srinivasan

1999

The effective transverse response of fiber reinforced composites with nonlinear interfaces, Zhifa Dong

An experimental investigation of flow-induced cavity oscillations, Michael Aaron Kegerise

Improved algorithm for three-dimensional inverse method, Xuwen Qiu

1998

The role of product specifications in integrated product and process design, Balaji Bharadwaj

Fully three-dimensional and viscous inverse method for turbomachine blade design, Sachin Vinayak Damle

Three-dimensional inverse method for turbomachine blades by the circulation method: The thickness problem, Jun Jiang

Representation and interpretation of geometric tolerances in a CAD system, Bing Li

Integrated cell formation and layout planning for manufacturing cells design, Joen-Il Moon

Numerical analysis of torque augmentation in viscous couplings, Chen Pan

Multi-layer adaptive digital particle image velocimetry and its application, Jinzhong Zhang

1997

Three new test methods for the determination of fracture toughnesses of bimaterial interfaces, Viswanathan Sundararaman

Graphical simulation and automatic verification of NC milling programs, Yaoxian Xu

1995

Analytical determination of energy release rate and mode mix for interfacial cracks in layered elastic structures, Hurang Hu

Design, validation, and testing of a hot-film anemometer for hypersonic flow, Mark Sheplak

1994

Triple-layer structure of vorticity amplification in the stagnation point flow and its effect on heat transfer, Xinyu Dou

1993

A connectionist expert system for learning process drift control in offset lithographic printing, Souhaila, Al-Mutawa

1984

On The Elastic Stability Of Flat-Plate Assemblages In Shear With Special Reference To Trapezoidal Corrugated Plates, Kumar Gobind Punwani

1979

Oil whirl and critical instabilities in rotor-bearing systems, Ehtisham Uddin Ahmad Siddiqui

Modelling of crack tip deformation with finite-element method and its applications, Chuang-Yeh Yang

1978

Kinetic And Mechanistic Aspects Of Gaseous Hydrogen Embrittlement, Karl Sieradzki

1968

Investigation Of The Diffusion Of A Scalar In Turbulent Shear Flow, Vitold Raimond Kruka

1965

Elasticity solution for the profiles of rolls in four-high mills to achieve uniform contact load distribution, Mathew K. Chakko